Tag: brown wire

Posted on by

A Quick Guide to Wiring: Hooking Up Systems for Spraying

Hey there Texas Industrial Remcor fans,

We’re back with another informative video release to help you with all your spraying needs. In this episode, our very own Jeff Mattke delves into the topic of hooking up systems, specifically focusing on the intricate details of wiring. So grab a cup of coffee, sit back, and get ready to learn some valuable insights.

Here are five key takeaways from the video:

1. Wiring the Single Boom Controller: Jeff walks you through the step-by-step process of hooking up the single boom system, explaining which wires go where and how to ensure a proper connection.

2. Understanding the Pressure Regulator: Learn about the positive and negative terminals on the pressure regulator and how to make quick adjustments based on the pressure levels.

3. Polarity and Solenoid Operation: Discover why the polarity of wires doesn’t affect the solenoid operation and how a simple switch can change the direction of the magnetic coil.

4. Hooking Up Multi-Boom Systems: Delve into the more complex wiring of multi-boom systems, including the cab harness and sprayer harness, and uncover the secrets behind connecting all those wires.

5. Replacement Kit: Explore the options available for replacing the rectangular rubber square plugs, as we provide alternative solutions to keep your system running smoothly.

Did you know that TIR stopped producing the style of rubber connectors shown in the video over 15 years ago? So, if you encounter any issues with these connectors, be sure to check out the replacement and repair kits we offer as a cost-effective solution.

That wraps up this episode, folks. We hope you found these wiring tips helpful and insightful. Remember, at Texas Industrial Remcor, we’re committed to providing you with top-quality valves and controls today and tomorrow.

As always, we encourage you to check out our website for additional information and resources. Visit www.sprayervalves.com to explore our range of products and stay up-to-date with the latest news and technology.

If you have any specific topics or challenges you’d like us to cover in future videos, feel free to reach out. We greatly appreciate your feedback and suggestions. Don’t forget to like and subscribe to our YouTube channel for more informative content like this!

Until next time, happy wiring!

Best regards,

Texas Industrial Remcor, Inc.

🌐 Visit our website: www.sprayervalves.com

📺 Watch the video: https://youtu.be/aN2NNOcKeks

📧 Contact us: [email protected]

📞 Call us: 254-982-4236

Posted on by

Boom Sprayer Control System Installation

install 4 of 4

🚜 Learn how to install the Boom Sprayer Control System in our latest video!

Hey there, loyal subscribers!

We hope you’re doing well and staying safe. We are excited to bring you the latest episode from Texas Industrial Remcor, Inc., where we dive into the installation process of the Boom Sprayer Control System. In this video, we walk you through step-by-step, making it easy for anyone to install and understand. So let’s get right into it!

Here are the 5 key things you’ll learn in this episode:

1. How to switch polarity with the wires in the Boom Sprayer Control System, allowing for negative or positive connections depending on the switch position.

2. The correct method of inserting and tightening a yellow or nylon tube into a fitting using a compression fitting, ensuring a secure connection.

3. Connecting an adapter to the first valve, which is then linked to the pump, providing a seamless flow of fluids.

4. Bringing two wiring harnesses together using a 6 pen weather pack plug, simplifying the electrical connections in the system.

5. Properly running the cab harness out of the back of the cab from the control box, ensuring a clean and organized installation.

Fun fact from the episode: Did you know that the electronic TIR E-Chip™ valve in the Boom Sprayer Control System draws a maximum of 2 amps for about a second and then drops down to a lower amperage? 😲 This feature helps to conserve power and ensures efficient operation of the system.

As we wrap up this episode, we want to remind you that the control box can be conveniently dropped out of the back of the cab and left there during use. Plus, the spray harness stays with the sprayer, while the control box remains with the tractor, making it easy and hassle-free to disconnect.

If you’re interested in learning more about the installation process or looking for quality valves and controls for your agricultural needs, check out the full video on our YouTube channel, Texas Industrial Remcor Official Channel or @TIRValves.

Don’t forget to hit the like button if you enjoyed the video, and subscribe to our channel to stay updated with our latest releases. Your support means the world to us!

Keep an eye out for our upcoming videos, where we’ll be diving deeper into helpful tips and tricks for maintaining and optimizing your agricultural equipment.

Until next time, happy spraying!

Warm regards,

The Texas Industrial Remcor, Inc. Team

🌐 Visit our website: www.sprayervalves.com

📺 Watch the video: https://youtu.be/rLf3jlF_iuw

📧 Contact us: [email protected]

📞 Call us: 254-982-4236